RECYCLED POLYPROPYLENE

This research investigated the utilization of polypropylene (PP) waste as an additive in the production of sandcrete blocks, aimed at promoting sustainable waste management and reducing the environmental impact of plastic pollution. The study sought to determine the influence of varying polypropylene waste contents on the physical and mechanical properties of sandcrete blocks, thereby evaluating its suitability as a construction material modifier. The experimental work involved producing paving stone specimens with 0%, 1%, 2%, 3% and 4% polypropylene waste by weight of sand. Aggregates were first characterized through specific gravity and sieve analysis to ensure conformity with standard specifications. Sandcrete blocks were then cast, cured in water, and tested for water absorption and compressive strength at 3 and 7 days of curing, following procedures outlined in relevant British Standards. This methodology ensured uniformity in mixing, curing and testing, allowing a clear assessment of polypropylene’s effect on the samples’ performance. The results showed the polypropylene addition influenced both durability and strength properties. Water absorption ranged between 0.64% and 2.88% with the lowest value recorded at 4% PP content, suggesting improved impermeability at higher plastic dosages. Compressive strength ranged from 11.41Mpa and 16.07Mpa, with optimum strength achieved at 1% PP addition, after which a gradual reduction is observed. It was concluded that the inclusion of polypropylene waste up to 1% can enhance strength and durability without compromising structural performance. The study recommends using low dosages of polypropylene waste in sandcrete blocks production and encourages further research into improving interfacial bonding through surface modification and longer curing periods to
maximize the material’s potential for sustainable construction.